Induction smart water dispenser - USB charging

Description

1. Long press the on/off button for more than 2 seconds until the green light flashes Long press on/key for 5 seconds until the indicatoris off
2. When the object is within 30cm of the three sides of the sensor, the water will come out automatically.The obiect keeps the pump working within the induction range.The object will stop working after leaving the induction range for 10 seconds,and the indicator light will flash and synchronize with the water pump
3. If the power is too low to work,the machine will automatically shut down,all the lights out
4. Charging: when external power is used to charge the battery, the red light will always be on, and the blue light will always be on when the battery is fully charged

Weight

• 1.2KG

Size

• 185*203*160MM

Material

• High gloss antibacterial PP resin

Battery

• The lithium battery/1800mAH

Power

• 2W

Charging port

• Min-usb

Filter Element Replacement Instructions

1. The filter element can be used for a long time.To ensure the effect,it is recommended to replace the filter element once every 2-3 months
2. The new filter element should be soaked and cleaned in clean water for 10 minutes before use

Precautions for use

1. According to the water quality and pet drinking habits, clean the water dispenser regularly
2. Please clean it at least once a week. This product is an inductive electronic device with electronic components
3. This product should be placed in a ventilated environment at home.Sponge and filter should be replaced regularly
4. Water should not be lower than the position of the pump,nor can it fill the tray